Fluke Calibration 5730A High-Performance-Calibrator
Tuotekoodi: 4334885
5720 ja 5700 -sarjan emulointi.
8,5 digitin yleismittareiden kalibrointi, kuten 3485A ja 8558A
Calibrate up to long-scale 8.5 digit digital multimeters and RF voltmeters with wideband option.
Improved AC voltage, AC current, and resistance specifications for increased test uncertainty ratios (TURs).
6.5-inch VGA touchscreen, a full-color interface, and Visual Connection Management™ output terminals
Full Met/CAL® compatibility with 5700A and 5720A procedures
Mikäli tuotteella ei ole näkyvissä hintaa, pyydä tarjous.
Product overview: 5730A High Performance Multifunction Calibrator
The calibrator for those who demand the best
The 5730A is designed for calibration professionals who require the most accurate dc/lf signals available in a multifunction calibrator, as well as those who simply want the best calibrator available. Metrologists in national laboratories, the military, third party calibration laboratories, and corporate users with high-end workload will value the performance and reliability of the 5730A. All 5730A calibrators are traceable to international standards and are produced in the factory with ISO/IEC 17025 accredited calibrations. Specifications are stated to the standard Fluke Calibration 99 % confidence level (as well as 95 % confidence level) to support easy measurement comparisons according to international quality standards. Specifications are absolute and include the uncertainty of the calibration standards used. No additional analysis is required.
- Tuotekoodi: 4334885
| Technical Specifications | ||
| Voltage DC | Range | 0 to ±1100 V |
| Best 1 Year, 95% Specification | 3.5 ppm + 2.5 µV | |
| Voltage AC | Range | 22 µV to 1100V |
| 10 Hz to 1 MHz | ||
| Best 1 Year, 95% Specification: | 42 ppm + 8 µV | |
| Resistance | Range | 0 to 100 MΩ, 18 values in x1 and x1.9 |
| Best 1 Year, 95% Specification | 6.5 ppm | |
| Current DC | Range | 0 to ±2.2A (0 to ±11A with 5725A; 0 to ±100 A with 52120A) |
| Best 1 Year, 95% Specification | 35 ppm + 7 nA | |
| Current AC | Range | 9 µA to 2.2A, 10 Hz to 10 kHz (9 µA to ±11A with 5725A; 9 µA to ± 120 A with 52120A) |
| Best 1 Year, 95% Specification | 103 ppm + 8 nA | |
| Wideband ac Voltage option | Range | 300 µV to 3.5V |
| 10 Hz to 50 MHz | ||
| Best 1 Year, 99% Specification | 0.4% + 500 µV | |
| General Specifications | ||
| Warm up time | Twice the time since last warmed up, to a maximum of 30 minutes | |
| Settling time | Less than 5 seconds for all functions and ranges except as noted | |
| Standard interfaces | IEEE-488 (GPIB), RS-232, USB 2.0 Device, Ethernet, 5725A, 52120A, phase lock in (BNC), phase reference out (BNC) | |
| Temperature performance | Operating | 0 °C to 50 °C |
| Calibration:15 °C to 35 °C | 15 °C to 35 °C | |
| Storage | -40 °C to 75 °C | |
| Operating altitude | 2000 m maximum | |
| Relative humidity | Operating | < 80% to 30 °C, < 70% to 40 °C, < 40% to 50 °C |
| Storage | < 95%, non-condensing. | |
| Safety | IEC 61010-1: 300 V CAT II, Pollution Degree 2 | |
| Analog low isolation | 20 V | |
| Electromagnetic environment | IEC 61326-1: Controlled | |
| Line power | 47 Hz to 63 Hz; ±10% 100 V, 110 V, 115 V, 120 V, 200 V, 220 V, 230 V, 240 V | |
| Power consumption | 300 VA | |
| Dimensions | Height | 17.8 cm (7 in), standard rack increment, plus 1.5 cm (0.6 in) for feet |
| Width | 43.2 cm (17 in), standard rack width | |
| Depth | 64.8 cm (25.5 in), overall; 59.4 cm (23.4 in), rack depth | |
| Weight | 27 kg: (62 lbs.) | |
| Absolute uncertainty definition | 5730A uncertainty specifications include stability, temperature coefficient, linearity, load regulation, and the traceability of the external standards used for calibration. You do not need to add anything to determine the total uncertainty of your calibrator for the temperature range indicated | |
| Specification confidence interval | 99% and 95% | |
| Technical Specifications | ||
| Voltage DC | Range | 0 to ±1100 V |
| Best 1 Year, 95% Specification | 3.5 ppm + 2.5 µV | |
| Voltage AC | Range | 22 µV to 1100V |
| 10 Hz to 1 MHz | ||
| Best 1 Year, 95% Specification: | 42 ppm + 8 µV | |
| Resistance | Range | 0 to 100 MΩ, 18 values in x1 and x1.9 |
| Best 1 Year, 95% Specification | 6.5 ppm | |
| Current DC | Range | 0 to ±2.2A (0 to ±11A with 5725A; 0 to ±100 A with 52120A) |
| Best 1 Year, 95% Specification | 35 ppm + 7 nA | |
| Current AC | Range | 9 µA to 2.2A, 10 Hz to 10 kHz (9 µA to ±11A with 5725A; 9 µA to ± 120 A with 52120A) |
| Best 1 Year, 95% Specification | 103 ppm + 8 nA | |
| Wideband ac Voltage option | Range | 300 µV to 3.5V |
| 10 Hz to 50 MHz | ||
| Best 1 Year, 99% Specification | 0.4% + 500 µV | |
| General Specifications | ||
| Warm up time | Twice the time since last warmed up, to a maximum of 30 minutes | |
| Settling time | Less than 5 seconds for all functions and ranges except as noted | |
| Standard interfaces | IEEE-488 (GPIB), RS-232, USB 2.0 Device, Ethernet, 5725A, 52120A, phase lock in (BNC), phase reference out (BNC) | |
| Temperature performance | Operating | 0 °C to 50 °C |
| Calibration:15 °C to 35 °C | 15 °C to 35 °C | |
| Storage | -40 °C to 75 °C | |
| Operating altitude | 2000 m maximum | |
| Relative humidity | Operating | < 80% to 30 °C, < 70% to 40 °C, < 40% to 50 °C |
| Storage | < 95%, non-condensing. | |
| Safety | IEC 61010-1: 300 V CAT II, Pollution Degree 2 | |
| Analog low isolation | 20 V | |
| Electromagnetic environment | IEC 61326-1: Controlled | |
| Line power | 47 Hz to 63 Hz; ±10% 100 V, 110 V, 115 V, 120 V, 200 V, 220 V, 230 V, 240 V | |
| Power consumption | 300 VA | |
| Dimensions | Height | 17.8 cm (7 in), standard rack increment, plus 1.5 cm (0.6 in) for feet |
| Width | 43.2 cm (17 in), standard rack width | |
| Depth | 64.8 cm (25.5 in), overall; 59.4 cm (23.4 in), rack depth | |
| Weight | 27 kg: (62 lbs.) | |
| Absolute uncertainty definition | 5730A uncertainty specifications include stability, temperature coefficient, linearity, load regulation, and the traceability of the external standards used for calibration. You do not need to add anything to determine the total uncertainty of your calibrator for the temperature range indicated | |
| Specification confidence interval | 99% and 95% | |
Kirjoita tähän..
Kirjoita tähän..